Office Buildings
Reliable voice and data coverage for workplaces.
Application Overview
Offices often combine dense interior partitions, glass curtain walls and high user density. A distributed antenna system with a suitable booster keeps calls and data sessions stable across meeting rooms, open-plan areas and lifts. For larger floors, a multi-band host and a balanced antenna layout are usually more effective than a single high-power unit.
Typical Installation Layout
A typical installation uses an outdoor donor antenna, a booster or fiber repeater, a distribution network and indoor service antennas.
- 1
Survey the outdoor donor signal and identify a suitable roof or facade antenna position.
- 2
Install the booster in a ventilated technical room and connect the donor antenna.
- 3
Distribute signal through ceiling antennas on each floor, using splitters and couplers.
Installation notes
- Plan antenna positions on the floor plan before cabling.
- Use a balanced number of antennas per branch to avoid large level differences.
- Consider a fiber repeater when the building has multiple wings or long cable runs.
Recommended Signal Booster Solutions
The models below are a starting point. The final Bill of Materials is confirmed after a site survey.
AL-30 Multi-Band LCD Signal Booster
Multi-band booster with LCD display, AGC and isolation detection for 100–3,000 m² coverage.
HAG-19-37T Dual-Band 4G Booster
Dual-band booster covering 1,000–5,000 m² for residential and commercial sites.
HAG-33DB3P Tri-Band Booster
Tri-band 33 dBm booster for multi-operator coverage.
Request a Solution
Share your floor plan, coverage area and target bands. Our engineering team will propose a practical configuration.
- sale@cellphonenetworkbooster.com
- Mon – Fri, 9:00 – 18:00 (GMT+8)
Helpful with your enquiry
- Floor plan or site photos
- Area, floors and ceiling height
- Target bands and operators
Frequently Asked Questions
How many indoor antennas does an office floor need?
It depends on floor area, partition density and output power. A common starting point is one ceiling antenna per 80–150 m² in partitioned offices, confirmed by a site survey.
Can the system cover multiple operators?
Yes. Select a dual-band or tri-band host with the operator bands used in your area. Frequency combinations are configured to order.
Will installation disrupt office operations?
Most cabling and antenna installation can be scheduled outside business hours. The booster itself is wall-mounted and requires only a power outlet and cable routes.
Can we use the same system for a future expansion?
Leave spare ports on splitters and reserve cable routes where possible. A larger host or an additional remote unit can be added later.